PRISM Forum - Message Replies


Topic: PRISM Questions and Answers
Topic Posted by: SRC (src_forum@alionscience.com )
Organization: SRC
Date Posted: Wed Jan 12 8:33:33 US/Eastern 2000
Topic Description: Welcome to the PRISM forum! Please feel free to post your questions and comments about the PRISM assessment software here.

Back to message list Show all replies About this forum

Original Message:

Posted by:Thomas Urbanczyk (thomas.urbanczyk "at" systema-gmbh.de )
Organization:Systema Engineering
Date posted: Fri Jan 20 5:14:35 US/Eastern 2006
Subject: IC,Memory/Microprocessor Model
Message:
By performing a MTBF FaultTree breakdown (PRISM was used for MTBF data input), I noticed the following issue regarding the IC,Memory/Microprocessor Model as utilized for main processors: How is it possible, that the PRISM model of a highly complex microprocessor (e.g. Freescale PowerPC) will deliver a lower (baseline) item failure rate as the PRISM model of a lowcost And-Gate? Both components has been modelled with the same parameters. I would expect the defect rate of the microprocessor significant higher. Could you please explain this circumstance? Could you furthermore make a proposal, how to represent the complexity of such highly complex ICs versus simple AND-Gate ICs with the given options in PRISM? Best regards, Thomas Urbanczyk


Reply:

Subject: IC Memory/Microprocessor model
Reply Posted by: David Dylis
Organization: System Reliability Center (SRC)
Date Posted: Tue Jan 31 9:11:32 US/Eastern 2006
Message:
To alleviate this issue, it is recommended that the junction temperature calculation be reviewed for complex integrated circuits as the default provided in PRISM may not be appropriate for the components in question.

The IC "Model Parameters" folder tab contains options for Junction Temperature Calculation and Hermeticity. The default selections, for which an IC failure rate will be automatically calculated with no input from the user, are:

The use of ambient temperature and a default temperature rise to calculate IC junction temperature

Non-hermetic package

The user has the ability to select three other options:

actual temperature rise
junction-to-ambient thermal resistance and power dissipation
IC case temperature, junction-to-case thermal resistance, and power dissipation

It is recommended that you choose one of these three additional options when determining the failure rates of the complex circuits used in your design.


Reply to this message
Next reply