Forum: Reliability & Maintainability Questions and Answers
Posted by: Barry Ma (email@example.com )
Date posted: Wed May 9 17:33:29 US/Eastern 2001
Subject: Can HASS replace Burn-in
Reasons to replace burn-in on PCB or higher assembly level with HASS are said as follows.
Burn-in is not effective today because component failure rate have improved by orders of magnitude. Other screens, such as all-axis vibration and high-rate thermal cycling, are vastly more cost effective today than burn-in on PCB or higher assembly level. What do you think of their opinion?
Posted by: D. Gordon (firstname.lastname@example.org )
Organization:Reliability Center, Inc.
Date posted: Tue May 8 10:02:12 US/Eastern 2001
Subject: Maintenance Guidelines for Generators
I am looking for maintenance guidelines (pm/rcm) for portable and fixed generators. Any resources where I can find this information would be most appreciated.
Posted by: Richard Smith (email@example.com )
Date posted: Mon May 7 14:02:33 US/Eastern 2001
Subject: Reliability Growth Development Test Help
Can anybody please point me to a Reliability Growth Development Test procedure, that will allow me to estimate how many units I need to place under test, and how long I will need to test them etc. in order to meet a required MTBF and confidence level ? Ideally, I would like to fix the test duration to say 6 months, and vary the number of test units required. Any help would be appreciated. Thanks, Richard.
Posted by: Luke DENG (firstname.lastname@example.org )
Organization:Aerospace Development Center
Date posted: Sun May 6 23:32:18 US/Eastern 2001
Subject: What's the definition of 4 Reliability parmameters ?
What's the following 4 parameter meaning ?
1.Mean Time Between Downing Event 2.Mission Time Between Critical Failure. 3.Mean Time Between Maintenance. 4.Mwan Time Between Demand
Posted by: John Plies
Date posted: Mon Apr 30 1:08:31 US/Eastern 2001
Subject: 20 20 Kitchen Design Dongle Lost =(
Does anyone know of a "fix" for 20 20 Kitchen Design dongle ?
Due to a break in, our design computer was stolen. Replacement computer & dongle is over 6000!! Can anyone help me ?