Forum: Reliability & Maintainability Questions and Answers
Posted by: Glen Hanington (ghanington@littlefeet-inc.com ) Organization:Littlefeet, Inc. Date posted: Tue Jan 23 11:51:42 US/Eastern 2001 Subject: Solder Connection Reliability Message: Does anyone have information regarding the reliability of component to board solder connections in the following application? We are using ceramic cavity filters in our product, some of which may be up to 2.5" long. As these are soldered into a G-10 printed circuit board there is some concern regarding the expected reliability of the solder connections. Our product will be mounted in an outside, non-weatherprotected environment, in a variety of locations around the world, and possibly experience a range of temperature extremes between -30degC to +50degC in normal use.
Posted by: SPM Date posted: Mon Jan 15 9:11:53 US/Eastern 2001 Subject: ESS Message: I would be grateful for any information, book titles and references as to how I would develop an effective ESS program. I would also appreciate any suggestions as to when a piece of equipment goes into volume production how to implement a tailored ESS program, i.e. sample sizes, the point where you screen batches rather than total output, how do you pick a batch etc etc. Thanks in advance
Posted by: Ken Meyerhoffer (kmeyerho@csw.L-3com.com ) Organization:L-3 Communications Date posted: Wed Jan 10 9:31:30 US/Eastern 2001 Subject: Chip Ferrite Bead Reliability Message: How have you dealt with SMT chip ferrite beads when performing reliability predictions in M217, Bellcore and PRISM?
Posted by: CA (christopher12@hotmail.com ) Date posted: Wed Jan 10 9:09:45 US/Eastern 2001 Subject: Optical Reliability Message: I am looking to gather information on optically induced damage effects in optical fibres and components. Ideally dealing with a wavelength of 1550nm and at power levels exceeding 150mw although any information on possible failure mechanisms would be appreciated.
Posted by: staale rundhaug (staale.rundhaug@kongsberg.com ) Date posted: Thu Dec 21 5:59:36 US/Eastern 2000 Subject: Prism software Message: We have bought PRISM v1.2 release 2 build 11; and i have trouble with the installtion. PC:Pentium II,400MHz,NT version 4.0 servicepack 6. Can anyone give me info what i shall do to get rid of the error message(54a),when trying to create new system. I have been told that there is som problem with NT. Suggestions
|
Copyright
• Privacy Policy
• Accessibility Statement
• Legal Notice
• Get Adobe® Reader® 
System Reliability Center • 201 Mill Street • Rome, NY 13440 • Phone (888) 722-8737 • Fax (315) 337-9932