SRC Forum - Message Replies


Forum: Reliability & Maintainability Questions and Answers

Topic: Reliability & Maintainability Questions and Answers

Topic Posted by: Reliability & Maintainability Forum (src_forum@alionscience.com )
Organization: System Reliability Center
Date Posted: Mon Aug 31 12:47:36 US/Eastern 1998

Back to message list Show all replies Topics List About this forum
Original Message:

Posted by: Henry Davis (henry.davis@das.honeywell.com )
Organization:Honeywell DAS
Date posted: Tue Mar 7 15:46:55 US/Eastern 2000
Subject: Failure rate for mosfets
Message:
There was a previous question regarding failure rate models for MOSFETs. Does the prism tool support this now? I was unable to tell from a download of the sample. Is it necessary to purchase the prism tool to develop the failure rate for industrial temp range MOSFETs? What have others done when working with MOSFETs? Thanks


Reply:

Subject: MOSFET Failure Rate
Reply Posted by: Bruce Dudley (bdudley@alionscience.com )
Organization: Reliability Analysis Center
Date Posted: Thu Mar 9 8:43:40 US/Eastern 2000
Message:
The new Prism model does contain a section for FET devices with new models. The demonstration Prism tool is available from the RAC web site and you should be able to down load it and perform a calculation for the FET device. Since the failure rates of most MOSFET devices as calculated from MIL-HDBK-217 are very high due to the age of the model and reference data (pre 1988), this Prism model should provide a more accurate reliability asessment of this device type. Another solution to your problem is to contact the vendors of these devices and collect test and historical data and make your own assessment of the reliability.


Reply to this message