SRC Forum - Message Replies
Forum: Reliability & Maintainability Questions and Answers
Topic: Reliability & Maintainability Questions and Answers
Topic Posted by: Reliability & Maintainability Forum
Organization: System Reliability Center
Date Posted: Mon Aug 31 12:47:36 US/Eastern 1998
Posted by: Andrew Comons
Date posted: Mon Mar 4 20:47:32 US/Eastern 2002
Subject: MTBF and Redundent Systems
I am trying to write a system specification
for equipment which will be fielded in pairs, the second system will act as backup system. Each system will be required to have a spare parts package on-board, where the fulltime attending operator will be required to employ built in diagnostics and correct faults within a period of 5 minutes. If faults can't be corrected in 5 minutes the decision is to switch to the backup system. Mission duration is 120 hours. Reliability goal is 95%.
I need to determine MTBF of the system, including the redundent but I do not know how to account for a failure if it is correctable by the 5 minute fault detection/correction requirement.
Sample calcs, references or advice available?
Thanks in advance.
Subject: MTBF and Redundant Systems
Reply Posted by: Gary Sunada
Organization: Reliability Analysis Center
Date Posted: Tue Mar 12 10:04:17 US/Eastern 2002
I apologize for the horrible formatting; let me try that again....
n [n*lambda+(1-P)*mu] lambda
mu + n (P + 1) lambda
n = number of active on-line units (in this case, = 1)
lambda = failure rate of one unit
mu = repair rate = 1 / mean corrective maintenance time in hours = 1 / 5 min (assuming that the repair will take 5 minutes, no more, no less -- you can adjust this, depending on the nature of the failure modes and their respective repairs) = 1 / 0.0833 = 12.0
P = probability of successful switching over to backup (in this case, with a live human operator, assume 100%) = 1