SRC Forum - Message Replies
Forum: Reliability & Maintainability Questions and Answers
Topic: Reliability & Maintainability Questions and Answers
Topic Posted by: Reliability & Maintainability Forum
Organization: System Reliability Center
Date Posted: Mon Aug 31 12:47:36 US/Eastern 1998
Posted by: Per Jonsson
Date posted: Mon Aug 16 8:31:11 US/Eastern 2004
Subject: Long term storage of electronics
I have a question about electronics in general and circuit boards in particular. Is there research done about how long it is possible to store electronic devices? Does anything happen if you store a cicuit for more than 20 years or is there a good chanse that everything works allright even after so many years. Is there any actions to take during storage to decrease the risk of failure?
Thanks for any help on the subject!
Subject: Storage Reliability
Reply Posted by: BWD
Date Posted: Tue Aug 31 10:06:45 US/Eastern 2004
The Reliability Toolkit translation factors for dormancy were developed for short term situations. The failure rates were based on data collected many years ago and covers short storage times. The purpose of the translation was to enable an analyst to make a rapid check based on active failure rates to see if the proposed design could meet the needs for short off cycles such as power off for the weekend. Long term assessments need to be analyzed part by part as corrosion is the main problem area. The best assessment for long term is to perform accelerated testing to see if problem areas exist.