SRC Forum - Message Replies

Forum: Reliability & Maintainability Questions and Answers

Topic: Reliability & Maintainability Questions and Answers

Topic Posted by: Reliability & Maintainability Forum ( )
Organization: System Reliability Center
Date Posted: Mon Aug 31 12:47:36 US/Eastern 1998

Back to message list Show all replies Topics List About this forum
Original Message:

Posted by: Paul Higgins ( )
Date posted: Sun Sep 11 15:47:35 US/Eastern 2005
Subject: Field Data
I am analysing field data from a piece of electro pneumatic equipment. The dat however refers to aircraft flying hours and not necessarily equipment operating hours. When a piece of equipment is returned for repair we record equipment operating data, however there are in excess of 1000 systems in service and we have only had 240 failure in 9 years. The problem is because the operational time of the population is not known it is not easy to determine the true reliability of the system and the equipments reliability is a contractual requirement. Does anyone have any thoughts on the best approach to take with the customer or any tips on analysing this type of data? We are trying to work with the customer to determine the average equipment operating rate during a known period of flying but as yet this is not known.


Subject: Operating Time Reliability
Reply Posted by: bwd ( )
Organization: SRC
Date Posted: Tue Sep 20 9:59:09 US/Eastern 2005
In the Reliability Toolkit Commercial Practice Edition, you will find a section (Appendix A) that defines translation parameters for reliability situations. In this section, the ratio of operating time to flight hours is stated to be 1.2. So, if you have the flight hours and failures, you can compute the operating time between failure by multiplying the flight hour MTBF by 1.2.

Reply to this message
Next reply