SRC Forum - Message Replies


Forum: Reliability & Maintainability Questions and Answers

Topic: Reliability & Maintainability Questions and Answers

Topic Posted by: Reliability & Maintainability Forum (src_forum@alionscience.com )
Organization: System Reliability Center
Date Posted: Mon Aug 31 12:47:36 US/Eastern 1998

Back to message list Show all replies Topics List About this forum
Original Message:

Posted by: Ben Walters (bwalters@etec.com )
Organization:Reliability Engineering Manager
Date posted: Tue Jan 12 20:15:37 US/Eastern 1999
Subject: Aluminum Electrolytic Capacitors
Message:
Can anyone provide info concerning the use of aluminum electrolytic capacitors in a controlled, benign environment? From past employers in the defense/aerospace industry, we always avoided these capacitors due to possible outgassing, creating a fire/explosion situation if a spark occurred. This was over 10 years ago, though. Has the technology of these capacitors changed and are they safer to use? Appreciate any help you can provide. Please e-mail to me as well as respond to this forum. Thanks again.


Reply:

Subject: Al Electrolytic Caps
Reply Posted by: Bruce Dudley (bdudley@alionscience.com )
Organization: Reliability Analysis Center
Date Posted: Wed Jan 13 16:10:26 US/Eastern 1999
Message:
Current manufacturing techniques for al electrolytic capacitors have minimized the problem of outgassing at low pressue-high altitude applications. These devices are now approved for use in airborne conditions. A manufacturing problem that should not be over-looked when using al electrolytics is the use of circuit board cleaning agents. These agents, such as trichloroethylene and freon, can and do seep around the end cap seal resulting in corrosion of the internal structure of the capacitor and failure. This information was found in our report "Reliable Application of Capacitors", 1996.


Reply to this message
Next reply